SHEETROCK (DRYWALL) SERVICES

Sheetrock and Drywall Services in Wichita, KS

Drywall work is easy to notice when it’s done poorly and almost invisible when it’s done right, which is exactly the goal. Visible seams, uneven texture, or nail pops showing through paint are all signs of rushed work, and they’re some of the most common complaints homeowners have after a renovation. Wichita Build Company handles sheetrock installation, taping, texturing, and repair with the kind of attention that keeps walls looking finished, not just covered.

We work on new construction, additions, and remodeling projects where walls need to be opened up and closed back in. Whether it’s a whole-house hang for new construction or a small patch after a plumbing repair, the process matters just as much on a two-square-foot patch as it does on an entire room.

New Installation

For new construction and additions, we hang sheetrock according to the framing layout, using the right thickness for the application, standard half-inch for most walls, five-eighths for ceilings and fire-rated assemblies where required by code. Seams are staggered and screwed properly to avoid the popping and cracking that shows up later when a job was fastened too loosely or too far apart.

Taping, Mudding, and Texturing

This is where drywall work is genuinely made or broken. Taping and mudding require multiple coats with proper drying time between each one, and rushing this step is the single biggest reason homeowners end up with visible seams after paint goes on. We apply tape, then multiple coats of joint compound, sanding smooth between coats, before moving to texture. We match existing texture on repair jobs, whether that’s a light orange peel, a heavier knockdown, or smooth walls, so patched areas blend in rather than standing out.

Repairs

A lot of our sheetrock work comes from repairs, water damage from a roof or plumbing leak, holes from moving furniture or a doorknob, or cracks that develop near corners and ceiling lines as a house settles. Small repairs might only need a patch and texture match, while larger water-damaged areas may require replacing sections down to the studs, especially if there’s been any mold growth that needs to be addressed first. We always check for the underlying cause before patching over it, because a repaired wall that leaks again in six months isn’t a repair worth doing.

Our Process

For larger jobs, we hang, tape, and texture in stages, allowing proper drying time between coats rather than rushing to finish on a compressed timeline. For repairs, we assess the damage, address any underlying moisture or structural issue first, then patch and texture to match the surrounding wall. We always do a final walk-through in good lighting, since drywall flaws that are invisible under work lights often show up clearly once paint and natural light come into play.

Signs You Need Drywall Repair

Cracks near door and window corners, nail pops showing through paint, water stains or soft spots on walls or ceilings, or seams becoming visible over time are all reasons to have a wall looked at. Cracking near ceiling lines is common as homes settle and isn’t always a serious issue, but it’s worth having someone check to rule out a bigger structural or moisture problem.

Frequently Asked Questions

Can you match existing texture on a repair?

Yes, matching texture is one of the more detailed parts of drywall repair, and it’s something we spend extra time on so patches don’t stand out.

How long does drywall take to dry between coats?

Typically 24 hours per coat depending on humidity and thickness, which is why rushed jobs often show problems later. We build proper drying time into every schedule.

Do you handle water-damaged drywall?

Yes, including assessing for mold and addressing the moisture source before replacing damaged sections.

If you’ve got a wall that’s cracked, patched poorly by someone else, or damaged from water, we’ll take a look and give you a straightforward plan to fix it right.